For assistance and advice call +44 (0) 20 7458 4088, anytime 24/7, 365
For assistance and advice call +44 (0) 20 7458 4088, anytime 24/7

Fossils Stuff - FPV Racing Products

Fossils Stuff - Thor X Class Racing Drone

Price: £195

The Fossils Stuff THOR is an X Class Racing Frame with 800mm motor centres. Can be flown with up to 12S batteries for ultimate performance. Fossils Stuff have created “THOR”  an X Class frame that meets the requirements of the X Class Rules in America. The rules for this class can be found here. Two 3mm carbon plates are separated and joined with 20mm diameter tube clamps. The lower plate has ready drilled mounting holes and slots for battery straps, ESC’s, FPV camera, VTX and receiver. The upper plate has ready drilled mounting holes and slo...


Fossils Stuff - Gravity 250-22

Price: CALL FOR ASSISTANCE

Fossils Stuff - Gravity 250-22

Price: CALL FOR ASSISTANCE

The Gravity 250-22 was Fossils Stuff evolution of the original Gravity 250. After popular request, the 250 was upgraded to 22** sized motors. The 250-22 is Fossils Stuff best selling frame after the FSGX 210. The Gravity 250-22 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty* The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows: Naze 32 with horizontally soldered header pins 22** series motors with 5” props DYS BLHeli 20 amp ESC’s CC3D Po...


Fossils Stuff - S1

Price: CALL FOR ASSISTANCE

Fossils Stuff - S1

Price: CALL FOR ASSISTANCE

The Fossils Stuff S1 is Smoky FPV’s signature frame. At the end of 2017, it was clear that the Revo 5 was becoming less competitive although it had had a great season with some incredible results, it seemed that it was just not light enough! Smoky requested a lighter frame and with his valuable input we came up with the S1. Race Results: Date Event Position Pilot February 2018 DRM                              1st Place Smoky FPV April 2018        Hull FPV Rivals Event   1st Place  Smoky FPV The S1 has been designed for 5″ Props. Extended arms for the use of 7″ props are available as an accessory. Included in the fame kit are the following components: 1 x Bottom Plate (2mm thick)...


Fossils Stuff - Gravity 250

Price: CALL FOR ASSISTANCE

Fossils Stuff - Gravity 250

Price: CALL FOR ASSISTANCE

The Gravity 250 is Fossils Stuff original High-Density Polyethylene (HDPE) racing frame and the first frame in the UK to be made from this incredibly tough material. Many hundreds of these frames have been sold to date. The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty* The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows: Naze 32 with horizontally soldered header pins 1806 series motors with 5” props DYS BLHeli 20 amp ESC’s CC3D Power...


Fossils Stuff - Gravity 280

Price: CALL FOR ASSISTANCE

Fossils Stuff - Gravity 280

Price: CALL FOR ASSISTANCE

The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This 6” frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty* The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows: Naze 32 with horizontally soldered header pins 2200 series motors with 6” props DYS BLHeli 20 amp ESC’s CC3D Power Distribution Board Skyzone TS5823 VTX Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover. Main Features: FPV camera protectio...


Fossils Stuff - Revo

Price: CALL FOR ASSISTANCE

Fossils Stuff - Revo

Price: CALL FOR ASSISTANCE

The Revo series of carbon fibre FPV racing frames uses a revolutionary rigging system made from state of the art dyneema cord to stiffen the frame arms. REDEFINED The REVO series of racing frames uses a revolutionary rigging system made from state of the art dyneema cord to stiffen the frame arms. The rigging is tightened using the onboard tensioner, allowing you to tune your frame for optimum performance and strength. Interchangeable arms give you the flexibility of changing propeller size using the same chassis. CHOICE Whatever your preference, the Revo has you covered. Three sizes mean you’ll enjoy the same groundbreaking dy...


Fossils Stuff - FSGX 210

Price: CALL FOR ASSISTANCE

Fossils Stuff - FSGX 210

Price: CALL FOR ASSISTANCE

A true X frame for 5″ props. The FSGX 210 Racing Frame has been CNC machined to the highest tolerances from three pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Limited Lifetime Frame Warranty. FSGX 210 The FSGX 210 Racing Frame has been CNC machined to the highest tolerances from three pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Limited Lifetime Frame Warranty* Available in a range of 5 colours the FSGX 210 has been designed around specific components keeping the frame as compact as possible and everything enclosed. Recommended components are as follows:...


Fossils Stuff - Gravity 180

Price: CALL FOR ASSISTANCE

Fossils Stuff - Gravity 180

Price: CALL FOR ASSISTANCE

The Gravity 180 FPV Racing frame has been CNC machined to the highest tolerances from four pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty. The Gravity 180 FPV Racing frame has been CNC machined to the highest tolerances from four pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty* The Gravity 180 has been designed around specific components to keep the frame as compact as possible. Recommended components are as follows: Naze 32 with ESC connections hard wired 1806 and 2200 series motors...